Siemens Sinumerik 840DiE sl - Data Descriptions (MD)

01/2007
11.8 Loadable compile cycles
11-403
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
11.8.6 Data descriptions (MD)
60900 + i
where i = 0. 1. 2. 3 ...
CC_ACTIV_IN_CHAN_XXXX[n]
with: XXXX = function identifier, n = 0 or 1
MD number n = 0: Activating the technology function in channels
n = 1: Additional functions within the technology function
Default setting: 0 Min. input limit: 0 Maximum input limit: FFFF
Changes effective after RESET Protection level: 2/7 Units: –
Data type: UINT16 Applies from SW version: 2.2
Significance: Activating the technology function in the channels:
The technology function is activated in the channels by means of index n = 0.
Bit 0 = 1: Technology function activated in channel 1
Bit n = 1: Technology function activated in channel n+1
For more details about which channels a technological function can be activated, please
refer to the manuals below.
Additional functions within the technology function:
The MD with index n = 1 activates additional functions within the relevant technology func-
tion. See References below.
References: /FB3/ Description of Functions Special Functions TE1 – TE8.
General
machine data
11 NCK Commissionin
g
with HMI Advanced