Siemens Sinumerik 840DiE sl - Ethernet Communication

7-161
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
Ethernet Communication
7.1 General
7.1.1 Ethernet PCU connections 50.3
Ethernet 1
(company network)
Ethernet 2
(system network)
PCU 50.3
Fig. 7-1 Ethernet connections of the PCU 50.3
The PCU 50.3 has 2 Ethernet connections (10/100 MBaud):
S Ethernet 1 (company network)
S Ethernet 2 (system network)
The interface ”Ethernet 1” is preset as a SINUMERIK DHCP client for connect-
ing to a company network or a PTP connection.
The interface ”Ethernet 2” is preset as a SINUMERIK DHCP server for connect-
ing to a system network with IP address 192.168.214.241.
The Ethernet components described below, e.g. Machine control panel MCP
483 IE, are connected via this Ethernet interface.
7.1.2 Determining the PCU Ethernet communication parameters
Start a Windows console on the PCU to determine the Ethernet communication
parameters of the PCU: Windows XP Start menu: Start > Run: cmd. On the
console, enter the command ipconfig.
Ethernet 1
Ethernet 2
7