Siemens Sinumerik 840DiE sl - Service Desktop

01/2007
5.4 Service Desktop
5-117
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
5.4 Service Desktop
The Service Desktop is intended for machine manufacturer/service personnel.
Numerous SINUMERIK–specific applications are available on the Service
Desktop in addition to the standard Windows functions.
5.4.1 Activation
Proceed as follows to enable the Service Desktop:
1. As soon as (1) is displayed under the version number on the bottom right of
the start–up screen, press ”3”.
V08.00.02.00
1
Fig. 5-2 Display during start–up of the SINUMERIK 840Di sl
2. Enter a password for protection levels 0 – 2:
Security class
Password Area
0 Reserved Siemens
1 SUNRISE (default) Machine manufacturer
2 EVENING (default) Commissioning/service
3. Click the ”Service Desktop” button in the displayed selection menu or press
the ”Return” key.
5.4.2 SINUMERIK–specific applications
The following SINUMERIK–specific applications are available on the Service
Desktop:
S Ghost Explorer
The Ghost Explorer is used to display the content of Ghost images.
References
The Ghost tools documentation is located on the PCU hard drive under:
E:\TOOLS
5 Power On and Power–U
p