Siemens Sinumerik 840DiE sl - SINUMERIK Operator Panel Fronts

01/2007
2.6 SINUMERIK operator panel fronts
2-69
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
2.6 SINUMERIK operator panel fronts
SINUMERIK operator panel fronts can be connected to the PCU either cen-
trally, i.e. directly via LVDS or USB interfaces, or decentrally with TCU (Thin
Client Unit) via Ethernet.
In the following section, the OP 012 operator front is described as an example in
detail.
2.6.1 Operator panel front OP 012
Alphabetic
key group
Numerical
key group
Cursor
key group
Control
key group
USB
front
interface
MouseArea switchover”ETC” key
Softkeys
Machine areaRecall
Softkeys and direct keys Softkeys and direct keys
Fig. 2-14 View of OP 012 operator panel front
Designation Order No. (MLFB)
SINUMERIK OP 012 6FC5 203–0AF02–0AA1
The OP 012 operator front provides the following features:
S 12.1” TFT flat screen (color); resolution 800 x 600 pixels
S Membrane keyboard with alpha, numeric, cursor and control keypad
S Softkeys/direct keys:
– 2 x 8 horizontal rows of keys with softkey function
– 2 x 8 vertical key rows with softkey and direct key functions
Order number
Features
2 Hardware Descri
p
tions