Siemens Sinumerik 840DiE sl - HMI Advanced (Option)

01/2007
15.2 Creating a series commissioning file
15-462
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
15.2.2 HMI Advanced (option)
The creation of a series startup file with HMI Advanced is divided into the follow-
ing steps:
1. Open the menu to create a series startup file:
Operating area switchover > Services > ETC key ”>” > Standard
commissioning > Create commissioning archive
2. Selection of components to be backed up (see figure: archive content)
3. Assignment of a filename (see figure: archive name)
4. Setting of the series startup file via the vertical ”Archive” softkey. The series
startup file is stored in the archive directory on the hard disk of the PCU.
Services CHAN1 MPF0AUTO
Program aborted
ROV
Channel RESET
Creating a series startup
archive
Archive content
Archive name
MMCNCPLCANTR
HMI data
selection
Read in
commissioning
archive
Archive
Standard
commissioning
HMI
NC
PLC
PROFIBUS drives
with compensation data
Fig. 15-1 Menu: Creating a series startup archive
15 User Data Backu
p
/Standard Commissionin
g