Siemens Sinumerik 840DiE sl - Assigning Via Web License Manager

01/2007
17.2 Assigning via Web License Manager
17-484
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
17.2 Assigning via Web License Manager
17.2.1 You can execute an assignment via direct access as follows
For direct access, log on to a computer connected to the Internet (PC/PG) with
the delivery note and license number in the Web License Manager. All licenses
of the delivery note numbers entered at the login may then be assigned to a
piece of hardware. After completing the assignment process, the new License
Key is displayed. This must then be entered in the licensing dialog of the HMI
components used.
The following prerequisites must be met in order to assign a license to a piece
of hardware via direct access and HMI user interfaces:
S The HMI component is connected with the control system (NCU) on which
the license should be assigned. Both components have been booted.
S A computer (PC/PG) with Internet connection and browser is available.
S The login data for the direct access (e.g., per CoL) are available:
– License number
– Delivery note number
Assigning a license to a piece of hardware:
1. Determine the HW serial number and the product name (HMI Advanced/HMI
Embedded: ”Type of hardware”) via the HMI Licensing dialog box.
HMI Advanced/HMI Embedded:
Operating–area switchover: Commissioning > key: etc. (”>”) >
Licenses > Overview
Note
Ensure that the hardware serial number displayed is also really the one you
want to make the assignment for. The assignment of a license to a piece of
hardware cannot be reversed via the Web License Manager.
2. Go to the Internet page of the Web License Manager:
http://www.siemens.com/automation/license
3. Login via ”Direct access”:
– License number
– Delivery note number
4. Follow the additional instructions in the Web License Manager.
Background
Requirements
Execution
17 License Mana
g
ement