01/2007
6.1 General
6-133
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
The individual blocks in the basic PLC program can be processed in the
SIMATIC manager:
S Select the appropriate block, e.g. OB 100 in the folder Blocks of the corre-
sponding Module
S Use the menu command Edit > Open Object to open the block or double–
click the block with the left mouse button
S Edit the block using the LAD/STL/CSF editor
Switch over the block display using the menu command View > LAD or STL
or CSF
Processing
modules
6 PLC Commissionin
To Next Page
Loading...
