Siemens Sinumerik 840DiE sl - Page 254

01/2007
9.2 ONLINE commissioning
9-254
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
The corresponding DRIVE–CliQ topology in the STARTER must appear as
follows:
Topology tree
Project setpoint
Control_Unit (1)
Set If Comparison
Infeed.Infeed (2)
Drive_1.Power_Module_1 (3)
DRIVE CliQ + Option SlotFilter:
Drive_3.SM_to_Motor_3 (15)
Drive_2.SM_to_Motor_2 (9)
Unassigned
[Drive_2|Drive_3].Power_Module_2 (6|8)
Drive_1.SM_to_Motor_1 (7)
Unassigned
Unassigned
Unassigned
Unassigned
Unassigned
Component folder
Unassigned
Note
Differences must be corrected manually. Click the appropriate component then,
keeping the left–hand mouse button depressed, drag it to the correct
connection. If the connection is already assigned, you can use a free
connection in the topology or the component folder as a buffer.
9 Drive Commissionin
g
(
SINAMICS
)