01/2007
1.1 Overview of SINUMERIK 840Di sl
1-32
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
SITOP POWER DC UPS module15 with
SITOP POWER ACCU MODULE
SIEMENS
SITOP POWER
standard 24V/10A
SINUMERIK 840Di sl
PROFIBUS DP
ET 200 I/Os
2) Free wiring
1) USB connection
Line infeed
110/220VAC, 60/50Hz
3) Free wiring
1) MCI board
2) MCI board extension (option)
1)
2)
Fig. 1-2 Possible connections: UPS
The UPS functionality can be configured in two ways:
S When using SITOP POWER DC UPS MODULE 15 (see Subsection 2.10,
Page 2-76) with a special software tool.
Download: http://www.siemens.de/sitop > Further topics: Download
Software DC UPS 15 A
S With Windows XP standard tools.
Start bar: Start > Settings > Control Panel > Power Options > tab card:
UPS
Notice
If the SINUMERIK user interface HMI Advanced (option) is installed on the
PCU, the following application must be executed with the UPS software:
F:\mmc2\hmiexit.exe to end HMI Advanced before the PCU is shut down.
Configuration
1 General Information on the SINUMERIK 840Di sl
To Next Page
Loading...
