Siemens Sinumerik 840DiE sl - Page 7

01/2007
vii
© Siemens AG 2007 All Rights Reserved
SINUMERIK 840Di sl Manual (HBIsl) – 01/2007 Edition
The following help functions are available with this description of functions:
S Overall table of contents
S Appendix with abbreviations and references, glossary
S Index
If you require information about a certain term, please look in the Appendix for
the specific Chapter Index for the particular term. Both the chapter number and
the page number are listed where you will find this particular information.
This manual contains information which you should observe in order to ensure
your own personal safety, as well to avoid material damage. Notices referring to
your personal safety are highlighted in the manual by a safety alert symbol;
notices referring to property damage only have no safety alert symbol.
Depending on the hazard level, warnings are indicated in a descending order as
follows:
If multiple levels of hazards can occur, the warning is always displayed with the
highest possible level. If a warning with a warning triangle is to indicate physical
injury, the same warning may also contain information about damage to property.
The following danger and warning signs are used in this document. Explanation
of symbols used:
!
Danger
This symbol indicates that death, severe personal injury or substantial property
damage will result if proper precautions are not taken.
!
Warning
This symbol indicates that death, severe personal injury or substantial property
damage may result if proper precautions are not taken.
!
Caution
This warning (with the triangular symbol) means that minor physical injury or
damage to property can occur if the appropriate precautions are not taken.
Caution
This warning (without the warning triangle) means that material damage may
result if proper precautions are not taken.
Notes on how to
use this manual
Safety notes
Danger and
warning strategy
SINUMERIK 840Di sl Manual
Preface