Vista 5 M3 Digital Mixing System
GC Operation 4-9
Document generated: 28.08.13
SW V4.9
4.2.2 The Status Bar
The Status bar at the lower edge of the screen has two functions:
• Displayingsysteminformation;
• Shorton-linehelpinformation.
Status information is displayed in the Status bar continually. It is especially
helpful to view the Status bar during startup of the Vista system, because
various information regarding the boot process and system parts will be dis-
played on the monitor screen.
‘Ready’ in the Status bar indicates that everything within the Vista is working
satisfactorily. Check Status will be displayed if there is something wrong with
the system (specifically, a red bullet appears in the Surveyor button, refer to
chapter 4.8 for more information), and sometimes during system booting
(which is normal).
If you move the cursor over a specific item in the toolbar, on-line help
in formation will be displayed. The information displayed describes the basic
function of the selected tool.
To Next Page
