Studer Vista 5 M3 - Switch Control Modes

Vista 5 M3 Digital Mixing System
AutoTouchPlus 5-79
Document generated: 28.08.13
SW V4.9
5.11.2 Switch Control Modes
Since switches and selectors are not continuous controllers like faders or
encoders, Control Modes affect switches in a unique manner.
Switch operations will perform the following functions when dynamic
switches are in the Control Modes indicated:
READ The Read Mix data will determine the switch state. AUDITION mode is
available.
  • PressandReleaseActuation:
- Without TOUCH – Hold engaged, Switch Press will toggle the switch
state and put the switch in Audition. The switch state will toggle back
at the next recorded change of state.
- With TOUCH – Hold engaged, Switch Press will toggle the switch
state and put the switch in Audition in a Held state. The switch will
hold its alternate state and stay in Audition until Held controls are
cleared.
  • PressandHoldActuation:
- Switch Press will toggle the switch state and put the switch in Audi-
tion. The switch will exit Audition when released. If its state does not
match the Read Mix state, it will toggle to match upon release.
WRITE While in RECORD previously written switch states will be overwritten.
WRITE AUDITION mode is available.
  • PressandReleaseActuation:
- Without TOUCH – Record or TOUCH – Hold engaged, Switch
Press will toggle the switch state and put the switch in Audition. The
switch state will toggle back at the next recorded change of state.
- With TOUCH – Hold engaged, Switch Press will toggle the switch
state and put the switch in Audition in a Held state. The switch will
stay in Audition until Held controls are cleared.
- With TOUCH – Record engaged, Switch Press will toggle the switch
state and punch the switch into RECORD. The switch will hold its
alternate state and stay in RECORD until Held controls are cleared.
  • PressandHoldActuation:
- Without TOUCH – Record, Switch Press will toggle the switch state
and put the switch in Audition. The switch will exit Audition when
released. If its state does not match the Read Mix state, it will toggle
to match upon release.