Studer Vista 5 M3 - Hardware Keys

Vista 5 M3 Digital Mixing System
Desk Operation 2-25
2.6.11 Hardware Keys
These keys give direct access to the cue list on the control bay. They can be
used to control various functions of the cue list and allow certain functions
to be switched using a hardware key, while it remains possible to use the
trackball and operate these functions on the graphic controller screen:
  • Switchingon/offthecross-fadefunctionbetweencues
  • Activateorinactivatethecuepreviewmode
  • Gotothenextorpreviouscue.
Note: To prevent accidental use, the PREV and NEXT keys are only active if ‘Arm
Cuelist’ is swiched on in the graphic controller screen. The corresponding
keys PREV and NEXT on the screen, however, are always active.
Document generated: 28.08.13
SW V4.9