Vista 5 M3 Digital Mixing System
2-28 Desk Operation
2.6.14 Grand Master Faders
Vista 5 M3’s control bay also hosts two ‘grand master’ faders.
The user determines which two faders are most important for
him and to which he wants constant access. This may be very
useful as an ‘emergency access’ to very important output
faders, since these faders will never scroll or be switched over
in any way. Which two channels are controlled by these
faders is defined in the top right corner of page 2 (Control
Bay tab) of the strip setup window, as shown above.
Note: Any two console faders can be assigned as ‘grand
master’ faders, regardless of their channel type.
Document generated: 28.08.13
SW V4.9
To Next Page
Loading...
