Vista 5 M3 Digital Mixing System
2-38 Desk Operation
2.8.9 Where are Clipboard Libraries Saved?
If you don’t want to maintain multiple libraries on your console, you never
have to change or define a name; just start directly, using the library function-
ality. The system will then use a library called DefaultClipboardLib.
If there are multiple libraries, you may select ‘Open Library’ from the file
menu of the clipboard window in order to select another library to work with.
It is also possible to save the whole library under a different name or to save
it to a portable storage device such as a CD-R by selecting ‘Save Library’ in
this file menu. Selecting ‘New Library’ in the file menu creates a new, empty
library.
In technical terms, a library is a subdirectory of the C:\D950System\
Users directory, it may also be located within any other user subdirectory.
Selecting ‘New User’ creates a new user directory containing an empty
Library called ClipboardLib.
2.9 Console Illumination
Standard gooseneck illumination may be connected to the rear of the Vista
5 M3 desk (3Pin XLR, 3 locations). Brightness may be varied in intensity
using the ‘Option: Vista Settings’ menu. There are two separate controls for
the console lights (including Vistonics
®
backlights) and for the gooseneck
illumination.
Document generated: 28.08.13
SW V4.9
To Next Page
Loading...
