Vista 5 M3 Digital Mixing System
5-30 AutoTouchPlus
Document generated: 28.08.13
SW V4.9
• Display Options menu: Right-clicking within the Mix Tree window will
bring up the Mix Tree menu. Selecting Display Options from this menu
will open a context menu which contains the three display modes. The
desired mode can be selected from this menu.
Notes Until a Pass Name is entered, the name defaults to the pass number. The sys-
tem detects this and when the display mode is set to display the name AND
number, if they match, only the number is displayed.
The Mix Pass number, name, and notes for the Active Mix are always dis-
played in the AutoTouchPlus window.
Round and Square Corners Mix Passes within the Mix Tree have either rounded or squared corners.
Rounded corners indicate the Mix Pass is part of the Mix Pass Stack. Squared
corners indicates it is not. See graphic below.
Green Highlight The Active Mix Pass is highlighted in green in the Mix Tree and by a green
LED symbol in the Mix Pass Stack.
Asterisk An asterisk will appear in the Mix Tree icons for all Mix Passes that contain
Mix Pass Notes. This condition will persist regardless of the chosen Display
mode, see the graphic below.
To Next Page
