Vista 5 M3 Digital Mixing System
Introduction 1-19
Document generated: 28.08.13
SW V4.9
Studio A
Studio Monitor A
e.g. Speaker
Studio B
Studio Monitor B
e.g. Speaker
Control Room
CR Monitor
Signaling Keys
GPI 4
GPI 5
Vista 5 M3 Desk
GPO 1
Live
GPI X
GPO X
GPI X
GPI X
Studio A Studio B
Red
Light
SIG1
SIG2
Talk
Red
Light
SIG1
SIG2
Talk
PFL Out
Talk to Talk to
Talk to Talk to
Talk to
GPO 3
GPO 2
GPI 1
Foot Switch
TB Mic
GPO X
GPO X
TB Keys
Desk
Operator
Talk to
AUX 1
Talk to
AUX 2
Talk to
AUX 3
Talk to
AUX 4
GPI 8
Talk to
Studio
A
Talk to
Studio
B
GPI 1
GPO 2
GPI X
GPO X
Producer area (in control room or separate room)
Talk to
Chan Out
Grp 01
Talk to
Chan Out
Grp N
Channel
Mute
Grp 01
Channel
Mute
Grp N
GPI X GPI X GPI X GPI XGPI XGPI X
Talk to
GPI 7GPI 9 GPI10 GPI11
Producer
GPI 6
GPI X
GPO 4
GPO X
Already configured:
GPI 1 Footswitch to talk to preselected
GPI 2 Talk to CR from Studio A
GPI 3 Talk to CR from Studio B
GPI 4 Signaling 1 Studio A
GPI 5 Signaling 2 Studio A
GPI 6 Talk to Studio A
GPI 7 Talk to preselected
GPI 8 Talk to AUX s 1
GPI 9 Talk to AUX s 2
GPI 10 Talk to AUX s 3
GPI 11 Talk to AUX s 4
GPO 1 Red light Studio A
GPO 2 Signaling 1 Studio A
GPO 3 Signaling 2 Studio A
GPO 4 Talk to Studio A
preselected
AUX1 AUX2
AUX3 AUX4
preselected
Legend:
= GPI already configured in .ini files
= GPO already configured in .ini files
= GPI prepared to use, bot not
assigned to signaling card.
Can be configured in .ini files
= GPO prepared to use, bot not
assigned to signaling card.
Can be configured in .ini files
Talkback and Signaling Block Diagram Using D21m GPIO Cards
TB In Studio A
(Line Level)
Talk to
CR
GPI 2
(-> to PFL Speaker)
TB In Studio B
(Line Level)
Talk to
CR
GPI 3
(-> to PFL Speaker)
TB Mic Out
(always on)
Prod TB In
(Line Level)
e.g. Intercom
To Next Page
Loading...
