Compile Processes A DSP compiler/assembler generates all the individual DSP files needed to
perform EQ, Dynamics, Summing, etc.
First all channels and then all the summing buses are allocated to the required
DSP card processors. Then the final core file is assembled from individual
components:
Finished ... And finally, the finished core and core knowledge files are automatically
stored. You only have to click OK to finish the whole process after the mes-
sage ‘Build All finished successfully!’.
Vista 5 M3 Digital Mixing System
Session Conguration 6-19
Document generated: 28.08.13
SW V4.9
To Next Page
