Vista 5 M3 Digital Mixing System
2-16 Desk Operation
solo is active. The offset level is displayed where normally the listening level
of the control room is visible. Turn the CR level knob for adjustment of solo
offset level.
CLR If any of the PLF or SOLO keys on the console is active (even if it is currently
not visible on the surface), this key will be lit. Pressing it clears all activated
PLF/SOLO functions on the channels.
EXT PFL SPEAKER This rotary control adjusts the level of the PFL signal going to the near-field
speakers. The near-field speakers are also used for listening to talkback return
signals.
PFL TRIM Pressing this key allows adjusting the solo offset level applied in the moni-
toring, whenever PFL is active. The offset level is displayed in place of the
control room level. Turn the CR level knob for solo offset level adjustment.
LIVE If active: Disables some dangerous functions for live work, such as talkback
to masters, and solo in place. It is possible to use this key to arm the cuelist,
so that the NEXT and PREV keys are activated on the desk. See static automa-
tion settings in chapters 4.4.4 and 4.4.4.5.
PFL BC Activates a mode where PFL or SOLO on a channel is automatically canceled
whenever the channel fader is open. A setting in the ‘Vista Desk Settings’
menu allows activating the function where the PFL/SOLO comes back after
the fader has been closed again.
CR INJECT If active: PFL signals will be audible in the main control room speakers as
soon as any PFL function is activated. Channels with SOLO active are always
inserted into the control room.
SIP SAFE Pressing this key enters setup mode for editing the channels that should be
safe from muting when activating SOLO IN PLACE on any other channel; by
default, all master channels are safe from muting when SOLO IN PLACE is
active. It may be desirable to protect effect returns from muting by adding
them to the group of safe channels. When in SIP SAFE setup mode, it is pos-
sible to select or de-select individual channels on the desk by pressing their
LINK / SEL key. Pressing SIP SAFE again will cancel edit mode and activate
the selected SIP protection. The information on the channels to be protected
is saved in each title, and therefore may vary from title to title.
Note: As a standard, the MULTISEL key is active when entering SIP SAFE setup
mode. In this way it is possible to select or de-select any channels to be safe
from muting. However, for clearing all currently selected and safe channels
(including master channels), the MULTISEL key may be de-activated. When
pressing any LINK / SEL key of a channel, all others will be de-selected.
NEAR FIELD, MAIN Selection of two speaker sets: MAIN is multi-channel surround (5.1), NEAR
FIELD is a two-channel stereo system. A separate level control is available
for each set of speakers, but can be deactivated at installation time. This may
be done in the monitoring.ini file by experts only.
Document generated: 28.08.13
SW V4.9
To Next Page
Loading...
