12713020-002-2 Revision D – April 2004 SSU-2000 User’s Guide 341
Interactive Command Set
ID
Use this command to display the fixed unit ID for the system.
Level 0 Displays
SSU2000
Level 1 Same as Level 0 operation
Level 2 Same as Level 0 operation
Level 3 Same as Level 0 operation
Level 4 Same as Level 0 operation
Remarks This command is used by test systems to tell the type of instrument
connected. This is different from the NAME command in that the
NAME information is settable by the user. The unit ID is also
returned on any status type command.
Related NAME
Restrictions None
Example:
SSU_2000->ID
Unit ID: SSU2000
To Next Page
Loading...
Need help?
General
