12713020-002-2 Revision D – April 2004 SSU-2000 User’s Guide 347
Interactive Command Set
IP
Use this command to view current Internet Protocol (IP) address information and
access related values.
Level 0 Not applicable
Level 1
IP
Use this command to display the current IP address, subnet mask,
gateway address, and the Ethernet hardware address.
Example:
SSU_2000->ip
The IP Address is 255.25.52.5
The Subnet Mask is 255.255.255.0
The Default Gateway is 0.0.0.0
The Ethernet Address is 00A06E000CCC
Level 2 Same as Level 1 operation
Level 3 Same as Level 2 operation, with the following additions:
IP {ADDR|MASK|GATE} ip_dotted_address
Options are:
ADDR Change the Internet Protocol (IP) address
MASK Change the subnet mask
GATE Change gateway address
Level 4 Same as Level 3 operation
Remarks When you change a network address, you must restart the
Communications Module in order for the changes to take effect.
Related None
Restrictions The IP address is in the decimal dotted address format (for
example: 192.168.70.224). No name server is allowed.
To Next Page
Loading...
Need help?
General
