12713020-002-2 Revision D – April 2004 SSU-2000 User’s Guide 373
Interactive Command Set
SYSTIME
Use this command to view the length of time in ISO format that the devices have
had power applied.
Level 0 Not applicable
Level 1
SYSTIME [xAy]
If you do not provide a parameter, length of time for all modules
displays.
Level 2 Same as Level 1 operation
Level 3 Same as Level 1 operation
Level 4 Same as Level 1 operation
Remarks None
Related None
Restrictions None
Example:
SSU_2000->systime
2001-06-18T21:31:57Z ID: SSU2000 Name: SSU_2000
1A01 0T09:13:35
1A02 5T03:25:59
1A03 4T04:06:37
1A04 3T06:26:05
1A05 4T04:05:48
1A08 4T03:30:10
1A09 9T01:43:29
1A10 9T01:43:31
1A11 9T01:43:32
1A12 0T09:12:35
2A01 9T01:30:59
2A02 0T05:32:39
2A03 9T01:30:53
To Next Page
Loading...
Need help?
General
