Interactive Command Set
372 SSU-2000 User’s Guide 12713020-002-2 Revision D – April 2004
STATUS
Use this command to view the current status of the unit. The status includes a count
of the current active alarms and related information, which provides a quick view of
unit performance.
Level 0 Not applicable
Level 1
STATUS [xAy]
If you do not provide a parameter, all status information from every
module in the unit displays. If a specified address operand is
provided, status detail information for that target module displays.
For each target module, refer to INPUT, CLK, or OUTPUT for a
description.
If the Communications module is specified, the bus connection
profile displays within 900 seconds.
If a Buffer module is specified, nothing displays.
Level 2 Same as Level 1 operation
Level 3 Same as Level 1 operation
Level 4 Same as Level 1 operation
Remarks None
Related CLK, OUTPUT, INPUT, EVENTS
Restrictions None
To Next Page
Loading...
Need help?
General
