Keywords
Keyword Description
102 TimeHub 5500 TL1 Reference Guide 097-55501-02 Issue 7 – January, 2005
Response Example:
SYMMBITS 04-06-18 11:43:10
M SC321 COMPLD
"CLK-2::CURRSSM = 0"
;
DSCTIME (Discontinuity Time)
This keyword sets the number of consecutive seconds with severe errors the
system waits before disqualifying the channel. The keyword format is:
DSCTIME=<value>
Command Example:
RTRV-EQPT::CLK:SC334:::PARAMETER=DSCTIME;
Response Example:
SYMMBITS 04-06-18 11:43:16
M SC334 COMPLD
"CLK::DSCTIME = 15"
;
ECLKEXP (Expected Expansion Controller Card)
This keyword allows you to set an expansion shelf (or shelves) either to be part of
the TimeHub system, or not to be a part of the TimeHub system. Since an
expansion shelf cannot function without at least one Expansion Controller (EC)
card, communication from the master shelf to an EC card in a given expansion shelf
detects if a functioning expansion shelf is connected. The keyword format is:
ECLKEXP=<value>
Parameter Value Description
<value> 1 to 15 Number of seconds
Parameter Value Description
<value> Y Allows communication with the specified Expansion Controller
card. If communication with this card is not taking place, an
EXCLKGONE event is generated (refer to the following
command example).
N Does not allow communication with the identified Expansion
Controller card.
To Next Page
Loading...
Need help?
General
