Commands
Command Description
84 TimeHub 5500 TL1 Reference Guide 097-55501-02 Issue 7 – January, 2005
Command Example:
SW-DX-EQPT::CLK:SC1;
The command in this example causes the active Clock card to switch to the
secondary Clock card.
Response Example:
<IP SC1
<
SYMMBITS 04-07-22 15:52:31
M SC1 COMPLD
;
SYMMBITS 04-07-22 15:52:31
A 0095 REPT EVT TSG
"CLK1:CLKACTV,SC,02-22,15-52-31:\"CLK Active\""
Verify Firmware Integrity
This command requests a Management card or Clock card to validate the
checksum of the firmware in the main memory. The command format is:
VRF-SFWR:[<tid>]:<aid>:<ctag>;
Note: This command is primarily for testing purposes.
To Next Page
Loading...
Need help?
General
