Symmetricom TimeHub 5500 Reference Guide

097-55501-02 Issue 7 – January, 2005 TimeHub 5500 TL1 Reference Guide 85
Commands
Command Description
Command Example:
VRF-SFWR:SYMMBITS:CLK1-MAIN:SC001;IP SC001
<IP SC001
<IP SC001
<IP SC001
<IP SC001
<
Response Example:
SYMMBITS 04-06-15 09:19:11
M SC001 COMPLD
;
Parameter Value Description
<aid> IMC-MAIN Validates the checksum of the firmware in the main memory on
the Management card. This command is denied if the checksum
cannot be validated.
IMC-BACKUP Validates the checksum of the firmware in the backup memory
on the Management card.
CLK1-MAIN Validates the checksum of the firmware in the main memory on
Clock card 1. This command is denied if the checksum cannot
be validated.
CLK1-BACKUP Validates the checksum of the firmware in the backup memory
on Clock card 1.
CLK2-MAIN Validates the checksum of the firmware in the main memory on
Clock card 2. This command is denied if the checksum cannot
be validated.
CLK2-BACKUP Validates the checksum of the firmware in the backup memory
on Clock card 2.

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English