Commands
Command Description
36 TimeHub 5500 TL1 Reference Guide 097-55501-02 Issue 7 – January, 2005
Change to Normal Mode
This command returns the system to the normal mode of operation, executing code
from the main memory. The command format is:
CANC-SWDL:[<tid>]:<aid>:<ctag>;
Command Example:
CANC-SWDL:SYMMBITS:IMC:SC001;
Response Example:
SYMMBITS 04-06-15 15:30:45
M SC001 COMPLD
;
Copy Network Memory
This command copies data from the working (WKG) memory to the auxiliary (AUX)
memory. The command format is:
CPY-MEM::NET:<ctag>::WKG,AUX;
Copy Network Memory Security
This command verifies that the PORTAOX and PORTCMD keywords do not have
the same value before copying the data from AUX memory to WKG memory.
Copying is denied if the values are the same (PORTAOX and PORTCMD are not
allowed to have the same value). The command format is:
CPY-MEM-SECU::NET:<ctag>::WKG,AUX;
Copy Software from Main to Backup Memory
This command copies the current firmware from the main memory to the backup
memory (or vice versa) in a
Management card or Clock card and requests the card to
validate the checksum of the memory transfer. The command format is:
COPY-SFWR:[<tid>]:<aid>:<ctag>;
Parameter Value Description
<aid> IMC Management card
CLK1 Clock card 1
CLK2 Clock card 2
To Next Page
Loading...
Need help?
General
