Symmetricom TimeHub 5500 Reference Guide

097-55501-02 Issue 7 – January, 2005 TimeHub 5500 TL1 Reference Guide 19
Introduction
Command Types
Provisioning
Table 1-2 lists provisioning commands, their syntax, and their factory-set security
access level. Provisioning commands are used in conjunction with keywords to set
up and configure system operation. For more information, see Chapter 2,
Commands.
System Administration
Table 1-3 lists system administration commands, their syntax, and their factory-set
security access level. System administration commands are used to set and
retrieve system information and force changes in system operation. For more
information, see Chapter 2, Commands.
Retrieve Status of Multiple
Remote Sessions
RTRV-STATUS-SECU Security
Retrieve User RTRV-USER User
Retrieve User Security RTRV-USER-SECU Security
Table 1-2 Provisioning Commands
Command Syntax
Factory Set
Access Level
Edit Equipment ED-EQPT[-TSG] Admin
Edit Sync ED-SYNC[-TSG] Admin
Retrieve Equipment RTRV-EQPT[-TSG] User
Retrieve Sync RTRV-SYNC[-TSG] User
Set Sync SET-SYNCN Admin
Table 1-3 System Administration Commands
Command Syntax
Factory Set
Access Level
Edit Date ED-DAT Admin
Initialize Event Log INIT-LOG Admin
Operate Alarm Cutoff OPR-ACO-ALL Admin
Remove Equipment RMV-EQPT Security
Table 1-1 Security Commands (Continued)
Command Syntax
Factory Set
Access Level

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English