097-55501-02 Issue 7 – January, 2005 TimeHub 5500 TL1 Reference Guide 109
Keywords
Keyword Description
Response Example:
SYMMBITS 04-06-18 11:45:35
M SC581 COMPLD
"CLK::HFQLEVLSEC = 4"
;
HLDACT (Holdover Action)
This keyword controls the Output Driver card operation when the system is in
holdover. The keyword format is:
HLDACT=<value>
Command Example:
RTRV-EQPT::OUTA:SC594:::PARAMETER=HLDACT;
Response Example:
SYMMBITS 04-06-18 11:45:41
M SC594 COMPLD
"OUTA::HLDACT = CONTINUE"
;
INACTTIME (Inactivity Time-out)
This keyword specifies the length of time a connection to the event reporting port
(PORTAO) continues without the occurrence of an automatic output message. The
inactivity timer has a setting range of 0 to 10000 and each setting has a time value
of 0.1 seconds (100 ms). For example, a setting of 100 specifies that after
10 seconds without an automatic message the connection to the TimeHub 5500
PORTAO is closed. The connection is re-established when another automatic
message occurs. The keyword format is:
INACTTIME=<value>
Parameter Value Description
<value> CONTINUE Output Driver card continues to operate
AIS Output Driver card produces an AIS signal
SQUELCH Output Driver card is squelched
Parameter Value Description
<value> 0 to 10000 Timeout in units of 100 ms
To Next Page
Loading...
Need help?
General
