097-55501-02 Issue 7 – January, 2005 TimeHub 5500 TL1 Reference Guide 55
Commands
Command Description
Either format generates the same response.
Firmware version 4328D provides a COMPLD in the header of the response
message. If there are partial responses, the COMPLD is in the header of the last
response. See the following example:
SNDKCAQO05050501 03-11-24 16:53:04
M SV15 COMPLD
"S1-CLK2:MJ,EXCLKGONE,NSA,11-24,16-47-15:\"Expansion
CLK card missing\""
>
;
Command Example:
RTRV-ALM:::SC1;
The command in this example displays all active alarms from the system.
Response Example:
SYMMBITS 98-01-02 16:30:45
M SC1 RTRV
"S0-CLK-1:MN,INDISQ,NSA,,:\"Input disqualified\""
"S0-CLK-2:MN,INDISQ,NSA,,:\"Input disqualified\""
"S0-CLK-3:MN,INDISQ,NSA,,:\"Input disqualified\""
"S0-CLK-4:MN,INDISQ,NSA,,:\"Input disqualified\""
>
SYMMBITS 98-01-02 16:30:45
M SC1 COMPLD
"S0-CLK2:MN,SNFAIL,SA,,:\Sync failure\""
;
Retrieve All Network Equipment Types
This command displays inventory information about the TimeHub 5500. The
command format is:
RTRV-NETYPE-ALL:::<ctag>;
Response Example:
>IP SC1
<
SYMMBITS 00-00-00 00:00:00
M SC1 RTRV
"TSG:Symmetricom,5500,TSG"
"S1-IMC:,090-55542-01-A,,R0039A,E26658,D0TPN00AAA, 267825"
"S1-CLK1:,090-55512-01-A,,R0039A,E26658,D0TPVP0AAA, 267862"
"S1-CLK2:,090-55512-01-A,,R0039A,E26658,D0TPVP0AAA, 267862"
To Next Page
Loading...
Need help?
General
