Symmetricom TimeHub 5500 Reference Guide

097-55501-02 Issue 7 – January, 2005 TimeHub 5500 TL1 Reference Guide 21
Introduction
Command Types
Network and Auxiliary Memory Commands
Table 1-5 lists network and auxiliary memory commands, their syntax, and their
factory-set security access level. Auxiliary memory contains a backup copy of
network parameters in working memory. For more information, see Chapter 2,
Commands.
Firmware Commands
Table 1-6 lists firmware setup commands, their syntax, and their factory-set security
access level. For more information, see Chapter 2, Commands.
Set Attribute SET-ATTR[-TSG] Admin
Set Threshold SET-TH[-TSG] Admin
Table 1-5 Network and Auxiliary Commands
Command Syntax
Factory Set
Access Level
Copy Network Memory CPY-MEM Admin
Copy Network Memory
Security
CPY-MEM-SECU Security
Table 1-6 Firmware Setup Commands
Command Syntax
Factory Set
Access Level
Activate Bulk Text Transfer
Mode
ACT-BTT Security
Activate Software Download
Mode
ACT-SWDL Security
Cancel Bulk Transfer Mode CANC-BTT Security
Change to Normal Mode CANC-SWDL Security
Copy Software from Main to
Backup Memory
COPY-SFWR Security
Erase Firmware from Main
Memory
DLT-SFWR Security
Table 1-4 Performance Monitoring Commands (Continued)
Command Syntax
Factory Set
Access Level

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English