Symmetricom TimeHub 5500 Reference Guide

Keywords
Overview
88 TimeHub 5500 TL1 Reference Guide 097-55501-02 Issue 7 – January, 2005
Overview
Keywords are used with provisioning commands. Table 3-1 lists the keywords,
descriptions, default values, accepted values, and example commands.
Table 3-1. Keywords and Descriptions
Keyword/
Description
Default
Value
Accepted
Value
Example Command
ACTSSM
(Active SSM)
-- -- RTRV-EQPT::CLK:SC16:::
PARAMETER=ACTSSM;
AIS
(Output AIS)
N Y / N ED-EQPT::OUTA:SC2:::AIS=Y;
AOMERGE
(Automatic Output Merge)
N Y / N ED-EQPT::IMC:SC3:::
AOMERGE=Y;
AUTOPM
(Auto-Upload PM)
N Y / N ED-SYNC::CLK-0:SC4:::
AUTOPM=Y;
B8ZS
(B8ZS)
Y Y / N ED-SYNC::CLK-3:SC5:::B8ZS=Y;
BRIDGED N Y / N ED-SYNC::CLK-2:SV12:::
BRIDGED=Y;
CBCOMP 0 0 - 6000 ED-EQPT::S1-OUTA-PG1:SC12:::
CBCOMP=100;
CCALIGN
(Composite Clock
Alignment)
N
(Master shelf only)
Y / N ED-EQPT::CLK:SC16:::
CCALIGN=N;
CCDEL
(CC Delay Value)
0 –10000 - 10000 ED-EQPT::OUTB-PG1:SC7:::
CCDEL=80;
CCDENB
(CC Delay)
N Y / N ED-SYNC::OUTC-20&&40:SC8:::
CCDENB=Y;
CLRPTALL N Y / N ED-EQPT::S0-OUTB:SC10:::
CLRPTALL=Y;
CURRSSM (Current
Synchronization Status
Message (SSM) Value)
-- -- RTRV-SYNC::CLK-2:SC9:::
PARAMETER=CURRSSM;
DSCTIME
(Discontinuity Time)
2 1 - 15 ED-EQPT::CLK:SC10:::
DSCTIME=10;
ECLKEXP N Y / N ED-EQPT::S2-CLK2:SV01:::
ECLKEXP=N;
ECONCRD
(Output Connector Card
Type)
DONT-CARE DONT-CARE /
DSC1 / CC
ED-EQPT::OUTD-PG1:SC11:::
ECONCRD=DS1;

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English