Keywords
Keyword Description
146 TimeHub 5500 TL1 Reference Guide 097-55501-02 Issue 7 – January, 2005
SYMMBITS 03-03-24 15:21:23
M SV48 COMPLD
"EQPT:Symmetricom,5500,EQPT"
"IMC:,090-55542-01-A,,R4236B,DOTPNONAAA,106063"
"CLK1:,090-55514-01-A,,R4236B,0000001,DOTPKPKAAA, 299461"
"CLK2:,090-55514-02,,R4236B,J44993,DOTPKRKAAA,299462"
"OUT6C:,090-55581-01-A,,R4209A,00J21559,DOTPJNOAAA,
267799,DS1,DS1"
"OUT8D:,090-55581-01-B,,R4209A,00J43250,DOTPJNOAAA,
267799,CC"
;
USESUBRCK set to Y:
RTRV-NETYPE-ALL:::SV48;
produces the following response (note S0 is present on response lines):
SYMMBITS 03-03-24 15:25:30
M SV49 COMPLD
"EQPT:Symmetricom,5500,EQPT"
"S0-IMC:,090-55542-01-A,,R4236B,J44568,DOTPNONAAA, 106063"
"S0-CLK1:,090-55514-01-A,,R4236B,0000001,DOTPKPKAAA,
299461"
"S0-CLK2:,090-55514-02,,R4236B,J44993,DOTPKRKAAA,
299462"
"S0-OUT6C:,090-55581-01-A,,R4209A,00J21559,DOTPJNOAAA,
267799,DS1,DS1"
"S0-OUT8D:,090-55581-01-B,,R4209A,00J43250,DOTPJNOAAA,
267799,CC"
;
WTRSS (Wait Time to Restore Synchronization Source)
This keyword sets the period of time (wait time) required of an input channel to
reestablish all operating parameters before it is considered for use as a
synchronization source. The keyword format is:
WTRSS=<value>
Command Example:
RTRV-EQPT:::SC1801:::PARAMETER=WTRSS;
Parameter Value Description
<value> 0 to 1000 Time in seconds