Symmetricom TimeHub 5500 Reference Guide

Commands
Command Description
52 TimeHub 5500 TL1 Reference Guide 097-55501-02 Issue 7 – January, 2005
Command Example:
DLT-SFWR:SYMMBITS:IMC-MAIN:SC001;
Response Example:
SYMMBITS 04-06-15 15:30:45
M SC001 COMPLD
;
Inhibit User Security
This command temporarily inhibits a user from logging on. The command format is:
INH-USER-SECU:[<tid>]::<ctag>::<uid>;
Command Example:
INH-USER-SECU:::SC001::FRED;
The command in this example temporarily inhibits FRED from logging on.
Initialize Event Log
This command clears the event log on both Clock cards or on a specific Clock card.
INIT-LOG:[<tid>]:<aid>:<ctag>::EVT;
Parameter Value Description
<uid> Up to ten case-insensitive
alphanumeric characters
Assigned user name
Note: This command correlates to the ALW-USER-SECU command
which reinstates a user.
Note: This command normally clears the event logs on both Clock
cards. However, it is possible to specify a particular Clock card for
diagnostic purposes in which case the other Clock card is not
affected.

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English