Symmetricom TimeHub 5500 Reference Guide

Troubleshooting
Events
172 TimeHub 5500 TL1 Reference Guide 097-55501-02 Issue 7 – January, 2005
The message format is:
<sid> <date> <time>
A 0009 REPT PM TSG
"<aid>:<montype>,<mondat>,<status>,,,[<meas time>]"...
;
Events
Events are conditions that occur and are detected in the TimeHub 5500. Alarms are
a subset of these events which have been configured, either by factory setting or by
the user, to indicate an alarm and generate an Alarm Event (RPT ALM TSG)
message.
Table 5-1 lists the TimeHub 5500 events.
Parameter Value Description
<montype> Refer to Chapter 4, Performance Monitoring
<mondat>
<status>
<meas time>
Table 5-1. TimeHub 5500 Events
Event
Code
Default Alarm
Severity
Default
Log
Configurable
Alarm Severity
Configurable
Log Settings
BTTMODE EVENT NO NO NO
CFGCHD EVENT NO NO NO
CFGRST NONALM YES NO YES
CLKACTV NONALM YES YES (NONE or
NONALM only)
YES
CLKCDIN NONALM YES YES (Cannot be set to
FAIL)
YES
CLKCDRM EVENT YES YES (NONE or
NONALM only)
YES
CLKDISA MAJOR YES YES YES
CLKFAIL FAIL YES YES YES

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English