Keywords
Keyword Description
128 TimeHub 5500 TL1 Reference Guide 097-55501-02 Issue 7 – January, 2005
Setting AOMERGE= Y does not stop events from being reported to the AO port.
In this case events are reported to the port specified by PORTAO as well as the
command port.
The keyword format is:
PORTAOX=<value>
Command Example:
RTRV-EQPT:::SC1088:::PARAMETER=PORTAOX;
Response Example:
SYMMBITS 04-06-18 12:01:11
M SC1088 COMPLD
"IMC::PORTA0X = 7589"
;
PORTCMDS (Command/Response Reporting
Port Number–Working Memory)
This keyword sets the port number for command and response reporting in working
memory. Working memory controls the actual operation of the network.
The keyword format is:
PORTCMDS=<value>
Note: If the Automatic Output Merge function is disabled
(AOMERGE=N), responses and commands are carried on a separate
port from automatic events. If the Automatic Output Merge function is
enabled (AOMERGE=Y), events are carried on the
Command/Response Reporting (PORTCDMS) port.
Parameter Value Description
<value> 5001 to 20000 Auxiliary memory port number for
automatic event reporting
Note: If the Automatic Output Merge function is enabled
(AOMERGE=Y) events, commands, and responses are carried on
this port.
To Next Page
Loading...
Need help?
General
