097-55501-02 Issue 7 – January, 2005 TimeHub 5500 TL1 Reference Guide 73
Commands
Command Description
Response Format:
<sid> <date> <time>
M <ctag> COMPLD
"<aid>:<state>"
;
The parameters displayed in the response are listed below.
Response Example:
SYMMBITS 04-11-05 12:30:00
M SC1 COMPLD
"LOCAL:ENABLED"
;
Retrieve Status
This command displays the names of users logged on and users inhibited from
logging on. The command format is:
RTRV-STATUS:[<tid>]::<ctag>;
Command Example:
RTRV-STATUS:::SC1;
Response Example:
SYMMBITS 04-12-02 16:30:45
M SC1 RTRV
":LOCAL&REMOTE,FRED&MARTHA,RS&GH&KL"
;
Parameter Value Description
<aid> LOCAL Local communication port
REMOTE Remote communication port
<state> ENABLED Communication port is enabled
DISABLED Communication port is disabled
HWENABLE Switch S2 on the Management card is set
to force enabling of the local
communication port. Applies only to the
local communication port.