Symmetricom TimeHub 5500 Reference Guide

Performance Monitoring
Measurement Properties
168 TimeHub 5500 TL1 Reference Guide 097-55501-02 Issue 7 – January, 2005
CRI-a a = Y or N Indicates if an input port is qualified (Y) or
disqualified (N). Does not apply to SPRD
monitored type
RPT-a a = Y or N Indicates if an event is generated (Y) or not
generated (N) when a threshold is crossed
PM-a a = Y or N Automatically displays (Y) or does not
automatically display (N) each new
measurement as it occurs
GOOD-a a = 1 to 15 Number of consecutive good measurements that
must occur following a bad measurement before
an input signal can be qualified and for the
INMEAS event to be cleared
Parameter Value Variables Description

Symmetricom TimeHub 5500 Specifications

General

Brand	Symmetricom
Model	TimeHub 5500
Category	Data Loggers
Language	English