097-55501-02 Issue 7 – January, 2005 TimeHub 5500 TL1 Reference Guide 61
Commands
Command Description
Command Example:
RTRV-COND:::SC009::CFGCHD;
The command in this example displays the Configuration Changed condition.
Response Example:
SYMMBITS 04-06-19 05:57:28
M SC009 COMPLD
"TSG:NR,CFGCHD,NSA,06-18,11-32-44,1,,\
"Configuration changed\""
;
Command Example:
RTRV-COND:::SC0011::LSTCFGC;
The command in this example displays the Latest Configuration Change condition.
Response Example:
SYMMBITS 04-06-19 05:57:33
M SC11 COMPLD
"TSG:NR,LSTCFGC,NSA,06-19,05-57-25,2055,,\
"Latest Configuration Change\""
;
Parameter Value Description
<aid> (Null) Displays equipment related conditions from both Clock cards and
Output cards, but only displays input signal related conditions from the
active Clock card. Includes all active conditions, including alarmed,
non-alarmed, and non-reported conditions for the active Clock card.
CLK Displays both equipment related and signal related conditions from
both Clock cards if active or inactive. Conditions from cards other than
Clock cards are not displayed.
CLK1 Displays both equipment related and signal related conditions from
Clock card 1 if it is active or inactive. Conditions from other cards are
not displayed.
CLK2 Displays both equipment related and signal related conditions from
Clock card 2 if it is active or inactive. Conditions from other cards are
not displayed.
<spec block> CFGCHD Displays, then clears, the CFGCHD (Configuration Changed) condition
with respect to the port receiving this command.
LSTCFGC Displays, but does not clear the LSTCFGC (Latest Configuration
Change) condition regardless of the port receiving this command.
To Next Page
Loading...
Need help?
General
