Commands
Command Description
68 TimeHub 5500 TL1 Reference Guide 097-55501-02 Issue 7 – January, 2005
RTRV-EQPT[-TSG]:[<tid>]:[<aid>]:<ctag>:::PARAMETER=<measurement>;
Command Examples:
RTRV-EQPT::CLK:SC1:::PARAMETER=SYNCMDE;
The command in this example displays the selection algorithm setting.
RTRV-EQPT::CLK:SC1:::PARAMETER=SYNCMDE&MANCHAN;
The command in this example displays the selection algorithm setting and the
selected manual channel number.
Note: For detailed descriptions of keywords, see Chapter 3,
Keywords.
Parameter Value Variables Description
<aid> CLK — Clock card. This parameter is
optional.
IMC Management card. This parameter is
optional.
Sa-OUTb a = 1 Shelf number. This parameter is not
optional.
b = A, B, C, or D Output Driver card letter. This
parameter is not optional.
<measurement> FFOF — Fractional Frequency Offset
LMRTIE Latest Maximum Relative Time
Interval Error
MRTIE Maximum Relative Time Interval Error
SPRD Frequency Spread
TDEV Time Deviation
TIE Time Interval Error
<value> See Chapter 3, Keywords
Note: For detailed descriptions of keywords, see Chapter 3,
Keywords.
To Next Page
Loading...
Need help?
General
