SYNAPTICON CIRCULO 7 - Page 171

1.2.6.2.1.4.3.2 Drive-to-Drive Cable
The Drive-to-Drive cable is used to connect two servo drives.
1.2.6.2.1.4.3.2.1 Cable details
Connector
Manufacturer
Connector
Part
Number
Cable Thickness Cable Flexibility
JST GHR-08V-S As thin as possible while conforming
to specs
As thin as possible while conforming
to specs
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.11.0 | Built 2021-07-23 171/887