SYNAPTICON CIRCULO 7 - Open OBLAC Drives; Powering the Box off and Resetting

2.1.1.3 Powering the box off and resetting
If you want to manually turn the box off you can either just disconnect it from the power supply or insert a
small tool into the power switch.
When you need to reset it, please hold the power switch for about 5 seconds.
2.1.1.4 Open OBLAC Drives
Open OBLAC Drives in your browser by navigating to http://oblac-drives-networkname.local
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.11.0 | Built 2021-07-23 312/887