SYNAPTICON CIRCULO 7 User Manual

3.1.9.1.140 0x6081 Profile velocity
Configures the velocity target for the end of the acceleration ramp during profiled motion. The value is given
in user-defined units (RPM by default; see 0x60a9 SI unit velocity to change it).
Name Index:Sub Type Bit
Size
Min
Data
Max
Data
Default
Data
Unit Access PDO
Mapping
Profile velocity 0x6081:0 UDINT 32 0 rpm readwrite Receive
PDO
(Outputs)
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.11.0 | Built 2021-07-23 783/887

SYNAPTICON CIRCULO 7 Specifications

General

Brand	SYNAPTICON
Model	CIRCULO 7
Category	Servo Drives
Language	English