3.1.9.1.48 0x200B Max power
This object is a limit on maximum mechanical power on motor shaft. Wrong settings of "motor torque
constant", "position sensor configurations" or "number of motor pole-pairs" can lead to misbehavior of power
limitation feature. By default the power of each Drive is internally limited to 110% of its Maximum Peak Output
Power value. As a result, this object will only be effective if its value is less than 110% of the drive's Maximum
Peak Output Power.
Name Index:Sub Type Bit
Size
Min
Data
Max Data Default
Data
Unit Access PDO
Mapping
Max
power
0x200B:0 UDINT 32 1 2147483647 2147483647 W readwrite
To Next Page
Loading...
Need help?
General
