SYNAPTICON CIRCULO 7 User Manual

3.1.9.1.160 0x60FF Target velocity
Sets the target velocity and will be used as input to the trajectory generator. The units are user-defined (RPM
by default; see 0x60a9 SI unit velocity to change it).
Name Index:Sub Type Bit
Size
Min
Data
Max
Data
Default
Data
Unit Access PDO
Mapping
Target velocity 0x60FF:0 DINT 32 0 rpm readwrite Receive
PDO
(Outputs)
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.11.0 | Built 2021-07-23 803/887

SYNAPTICON CIRCULO 7 Specifications

General

Brand	SYNAPTICON
Model	CIRCULO 7
Category	Servo Drives
Language	English