SYNAPTICON CIRCULO 7 - 0 X6071 Target Torque

3.1.9.1.126 0x6071 Target Torque
Sets the desired torque for the torque controller in profile torque mode. The units are per thousand of rated
torque.
Name Index:Sub Type Bit
Size
Min
Data
Max
Data
Default
Data
Unit Access PDO
Mapping
Target Torque 0x6071:0 INT 16 0 readwrite Receive
PDO
(Outputs)
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.11.0 | Built 2021-07-23 769/887