SYNAPTICON CIRCULO 7 - 0 X2701 Tuning Command

3.1.9.1.103 0x2701 Tuning command
This object is used in tuning mode to specify the parameter that is configured. Altering the default values is
recommended for expert users only!
Name Index:Sub Type Bit
Size
Min
Data
Max
Data
Default
Data
Unit Access PDO
Mapping
Tuning
command
0x2701:0 UDINT 32 0 readwrite Receive
PDO
(Outputs)
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.11.0 | Built 2021-07-23 745/887