Linux
2. Install and open VMware Workstation Player
Note
ANY version of VMWare Workstation Player starting from 14.0 can be used for OBLAC Drives.
3. Open a virtual machine
4. Select the downloaded OBLAC Drives image (OVA file) and import it to VMware Player
Note
If you get a warning that the import failed, just click “Retry” and it will run.
You may also check “Do not show this message again”
5.
Go to Virtual Machine Settings and check if two network adapters are available - one set to NAT and
one set to Bridged (Automatic)
Ensure that the “Replicate physical network connection state” option is checked
Press OK to save changes
6. Network settings
Execute
To Next Page
Loading...
Need help?
General
