SYNAPTICON CIRCULO 7 User Manual

Fig. 2: increasing k to increase the actual
speed
Step 4.
From this step forth, step response of the system should be checked. Increase k step by step to increase the
speed of velocity controller (as a suggestion start with k equal to 0.01 and in each step increase it by a factor of
2).
P
I
I
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.11.0 | Built 2021-07-23 870/887

SYNAPTICON CIRCULO 7 Specifications

General

Brand	SYNAPTICON
Model	CIRCULO 7
Category	Servo Drives
Language	English