SYSMEX XP Series - Page 166

11-8 Sysmex XP-300
Instrument Setup
Revised July 2012
Network
Address and other necessary settings can be made here for use of
LAN (Ethernet) port to communicate host computer. In addition, the
MAC address can be checked at this screen. For details, consult
network administrator at your laboratory.
• Client
• Host
Parameter Setting
[IP Address] Numeric input:
0 - 255 (common to all columns)
Default: “192.168.0.100
”
[Network Mask] Numeric input:
0 - 255 (common to all columns)
Default: “255.255.255.0
”
[Default Gateway] Numeric input:
0 - 255 (common to all columns)
Default: “0.0.0.0
”
Parameter Setting
[IP Address] Numeric input:
0 - 255 (common to all columns)
Default: “192.168.0.20
”
[Port Number] Numeric input: 0 - 9999
Default: “5006
”
Note:
Numeric input exceeding the upper limit is replaced with
the upper limit value in any parameters other than [Port
Number].